Convert Square Feet to Square Meters Instantly
Use this Square Feet to Square Meters converter to change area from square feet (ft²) into square meters (m²) with fast, accurate results. Enter any decimal area, reverse the conversion, calculate floor area from dimensions, or compare the same surface across common metric and imperial units.
Convert ft² to m², reverse m² to ft², calculate rectangular floor area, or convert one area value across several common units.
Enter square feet to calculate square meters plus other useful area units.
Decimals are supported for precise floor or surface areas.
Reverse the conversion by multiplying square meters by approximately 10.7639104167.
Enter room length and width in feet to calculate total area in ft², m², yd² and in².
Enter one area value and choose its starting unit to convert across common metric and imperial units.
The square foot and square meter are both units of area. Square feet are widely used for homes, rooms, flooring, real estate, construction and property listings in the United States, while square meters are the standard metric area unit used internationally. Converting between them makes it easier to compare floor plans, materials, property sizes and technical specifications.
The conversion factor is exact because one international foot is exactly 0.3048 meter. Squaring that length conversion gives exactly 0.09290304 square meter per square foot. Therefore, to convert square feet to square meters, multiply the ft² value by 0.09290304.
Example: 1,000 ft² × 0.09290304 = 92.90304 m².
Example: 50 m² × 10.7639104167 ≈ 538.1955 ft².
A square foot is the area of a square measuring one foot by one foot. Since a foot is exactly 0.3048 meter, a square foot equals 0.3048 × 0.3048 = 0.09290304 m². The relationship is an area conversion, which means you cannot use the linear foot-to-meter factor of 0.3048 by itself.
The table below shows common floor and property areas converted from square feet to square meters. It is useful for quick estimates when comparing room sizes, apartments, houses, offices, flooring quantities and international property listings.
| Square Feet (ft²) | Square Meters (m²) | Square Yards (yd²) | Square Inches (in²) |
|---|---|---|---|
| 1 ft² | 0.09290304 m² | 0.111111 yd² | 144 in² |
| 10 ft² | 0.9290304 m² | 1.111111 yd² | 1,440 in² |
| 50 ft² | 4.645152 m² | 5.555556 yd² | 7,200 in² |
| 100 ft² | 9.290304 m² | 11.111111 yd² | 14,400 in² |
| 250 ft² | 23.22576 m² | 27.777778 yd² | 36,000 in² |
| 500 ft² | 46.45152 m² | 55.555556 yd² | 72,000 in² |
| 750 ft² | 69.67728 m² | 83.333333 yd² | 108,000 in² |
| 1,000 ft² | 92.90304 m² | 111.111111 yd² | 144,000 in² |
| 1,200 ft² | 111.483648 m² | 133.333333 yd² | 172,800 in² |
| 1,500 ft² | 139.35456 m² | 166.666667 yd² | 216,000 in² |
| 2,000 ft² | 185.80608 m² | 222.222222 yd² | 288,000 in² |
| 2,500 ft² | 232.2576 m² | 277.777778 yd² | 360,000 in² |
| 3,000 ft² | 278.70912 m² | 333.333333 yd² | 432,000 in² |
| 5,000 ft² | 464.5152 m² | 555.555556 yd² | 720,000 in² |
100 × 0.09290304 = 9.290304 m².
500 × 0.09290304 = 46.45152 m².
1,000 × 0.09290304 = 92.90304 m².
2,500 × 0.09290304 = 232.2576 m².
For decimal square-foot values, use the same factor. For example, 825.5 ft² × 0.09290304 equals approximately 76.69146 m². Keeping the exact factor during the calculation helps avoid unnecessary rounding error.
The international foot is defined as exactly 0.3048 meter. A square foot has two dimensions, so convert both sides: 0.3048 meter × 0.3048 meter. The product is exactly 0.09290304 square meter. This means the ft²-to-m² factor is not an approximation.
The reverse factor, square meters to square feet, is written as approximately 10.7639104167 because dividing one by 0.09290304 produces a repeating decimal. Calculators usually display a practical number of digits while preserving sufficient precision for everyday building, real-estate and engineering work.
A 10-foot by 10-foot square covers 100 square feet, which is exactly 9.290304 square meters.
A square feet to square meters conversion is especially useful when comparing property listings, floor plans and construction specifications from countries that use different measurement systems. U.S. homes and commercial buildings are often marketed in square feet, while many international listings use square meters. Converting the area gives you a consistent basis for comparison.
It is also helpful for flooring, tile, carpet, paint coverage, insulation, roofing, wall panels and surface materials. A supplier may list product coverage in m² while your project drawings are in ft². Converting before ordering helps you estimate quantities more consistently.
A square foot is the area of a square measuring one foot on each side. A square meter is the area of a square measuring one meter on each side. Since a meter is longer than a foot, one square meter contains more area than one square foot.
One square meter is approximately 10.7639 square feet. That means a 100 m² home is about 1,076.39 ft², while a 1,000 ft² home is about 92.90 m². The actual physical size is unchanged when converted; only the unit label and numerical value change.
For the reverse calculation, multiply square meters by approximately 10.7639104167. For example, 75 m² × 10.7639104167 ≈ 807.2933 ft². You can also divide square meters by 0.09290304 because that is the exact number of square meters in one square foot.
The reverse calculator above performs the operation automatically and also shows related imperial and metric units, which is useful when a specification includes several different area measurements.
Property size is one of the most common reasons people convert square feet to square meters. An apartment listed at 600 ft² is approximately 55.74 m². A 1,200 ft² home is approximately 111.48 m², while a 2,000 ft² house is approximately 185.81 m². These conversions can make international real-estate comparisons much easier.
Keep in mind that advertised floor area may be measured differently depending on local standards. Some listings may include internal wall thickness, balconies, storage areas or common spaces while others may not. The unit conversion itself is precise, but the meaning of the original listed area depends on how the property was measured.
Flooring projects frequently mix ft² and m² because room dimensions, retailer packaging and manufacturer coverage may use different systems. Start with the actual floor area, convert it to the unit used by the product, and then add an appropriate waste allowance for cuts, pattern matching, breakage or future repairs.
For example, a 320 ft² floor equals 29.7289728 m² before waste. If a flooring product is sold by square meter, use the converted area as the base quantity and then apply the waste percentage recommended for that material and installation pattern.
0.3048 converts feet to meters for length. Area requires 0.3048² = 0.09290304.
Feet measure length; square feet measure two-dimensional area.
Use the exact ft²-to-m² factor through the calculation, then round the final result.
Property listings may define usable or gross floor area differently even when units are converted correctly.
Because 1 ft² = exactly 0.09290304 m², the forward conversion can be carried out without approximation in the factor. The level of precision you report should still reflect the accuracy of your original measurement. For a rough room estimate, two decimal places may be enough. Surveying, engineering or manufacturing work may justify keeping more digits.
Avoid displaying excessive decimal places when the source measurement is approximate. A room measured only to the nearest foot does not become more accurate simply because the converted m² result is shown to six decimal places.
For more useful area conversions, see Square Meters to Square Feet, Square Feet to Square Yards, Square Feet to Square Inches, Acres to Square Feet, Square Yards to Square Feet and Square Meters to Square Inches. These tools are useful for property, construction, flooring and general unit conversion work.
For official guidance on SI and U.S. customary measurement relationships, see NIST SI Units – Length, NIST SI Units – Area, and the BIPM International System of Units.
Quick answers about ft², m², formulas, room sizes and area conversion.