Estimate Concrete Prices Across Georgia
Use this Concrete Cost in Georgia calculator to estimate ready-mix material, cubic yards, delivery and short-load fees, pump charges, labor, and total installed slab cost. Enter your own supplier quote for the most accurate estimate, or start with a practical planning price and adjust it for Atlanta, Augusta, Savannah, Macon, Columbus, Athens, or your local Georgia market.
Estimate a slab from dimensions, price known cubic yards, calculate installed cost by square foot, or compare two supplier quotes side by side.
Calculate cubic yards, waste allowance, ready-mix material, fixed fees, labor and estimated total project cost.
Replace with your current Georgia supplier quote.
Use this when you already know the cubic yards required and only need a delivered-material budget.
Create a low-high budget for a slab, patio, walkway, garage floor or driveway using installed square-foot pricing.
Compare two ready-mix quotes using the same yardage while including each supplier's fixed fees.
Concrete pricing in Georgia depends on more than a statewide average. The price changes with concrete strength, supplier, delivery distance, truck minimums, short-load fees, fuel or environmental charges, pump access, additives, finishing, reinforcement, demolition, grading and site conditions.
Current published Georgia supplier examples show why a single statewide number can be misleading. Quick Mix Concrete in Metro Atlanta lists contractor pricing of $195 per cubic yard for 3,000 PSI, $215 for 4,000 PSI and $225 for 5,000 PSI, plus listed fees such as a short-load charge for six cubic yards or less and a fuel/environmental charge. American Concrete in Augusta lists 2026 C.O.D. pricing of $174 per cubic yard for 3,000 PSI and $182 for 4,000 PSI. Prices are subject to change, so use these as market examples rather than guaranteed statewide rates.
| Cost Component | What It Covers | Why It Changes | Estimator Input |
|---|---|---|---|
| Ready-mix concrete | Concrete material per cubic yard | PSI, mix design, supplier, market | $/yd³ |
| Delivery | Truck dispatch and travel | Distance, traffic, plant location | Fixed fee or included |
| Short-load fee | Charge for small orders | Supplier minimum and yardage | Fixed fee |
| Pump / equipment | Placement equipment | Access, hose length, project size | Fixed or hourly cost |
| Labor / finishing | Placement, screeding, finishing | Finish level, crew, complexity | $/ft² |
| Reinforcement | Rebar, mesh or fibers | Structural requirements | Separate allowance |
| Site work | Excavation, grading, base prep | Soil, slope, drainage, access | Separate allowance |
There is no single permanent price for one cubic yard of concrete in Georgia. Published 2026 local examples show 3,000 PSI ready-mix prices around the mid-$170s per yard in the Augusta market and around the mid-$190s per yard from a Metro Atlanta short-load specialist. Higher-strength concrete can cost more.
A practical planning estimate might start around $180 per cubic yard, but the exact number should be replaced with a supplier quote. Small projects can have a much higher effective cost per yard after short-load, delivery and fuel/environmental fees are included.
Use feet for length and width, and inches for slab thickness.
Add delivery, short-load, pump, additives and labor separately.
A 20 ft × 20 ft slab at 4 inches thick contains about 4.94 cubic yards before waste. With an 8% allowance, the order quantity is about 5.33 cubic yards. At a planning material rate of $180 per cubic yard, the ready-mix portion is roughly $959 before delivery, short-load charges, pumping, reinforcement, site work or labor.
If labor and finishing were budgeted separately at $6 per square foot, the 400-square-foot slab would add $2,400 in labor/finishing before other project-specific costs. The calculator above lets you change every assumption instead of forcing a one-size-fits-all total.
Metro Atlanta concrete pricing can be affected by traffic, delivery windows, plant distance, short loads and urban job-site access. Quick Mix Concrete currently publishes 2026 pricing starting at $195 per cubic yard for 3,000 PSI, with higher listed rates for 4,000 and 5,000 PSI mixes. It also publishes separate short-load and fuel/environmental charges.
For an Atlanta project, enter the exact quoted material price and fees into the calculator. Do not assume the price from one supplier applies to every ready-mix plant in the metro area.
American Concrete publishes 2026 C.O.D. prices for its Augusta-area market, including $174 per cubic yard for 3,000 PSI and $182 per cubic yard for 4,000 PSI. It also lists a minimum-purchase structure for small C.O.D. orders. This illustrates why small loads should be priced by the full quoted invoice rather than only by the advertised per-yard rate.
Savannah and Southeast Georgia have multiple ready-mix suppliers, but many publish quote-request systems rather than fixed online prices. Delivery distance from the plant, order size, mix specifications and coastal project logistics can all influence the final quote.
When planning a Savannah-area project, request the total delivered price for the exact yardage and PSI rather than asking only for a base price per yard.
A short load is an order below a supplier's preferred or full-truck quantity. This matters because a 2- or 3-yard job can cost much more per yard than a larger order. One Metro Atlanta supplier currently lists a $200 short-load fee for six cubic yards or less, illustrating how a fixed fee can materially change the effective per-yard cost.
Higher compressive strength generally requires a different mix design and often carries a higher price. Published Georgia supplier pricing currently shows a clear progression from 3,000 PSI to 4,000 PSI and 5,000 PSI mixes. The correct strength should be chosen for the project requirements, not simply the lowest price.
For structural slabs, foundations, driveways or engineered work, follow the plans, local code requirements and your contractor or engineer's specifications.
Installed concrete pricing combines more than ready-mix material. National 2026 cost guides commonly place plain installed concrete slabs around the mid-single digits to low double digits per square foot, depending on site work and finish. Georgia projects can fall below or above that range.
Use the green calculator above to model a low-high installed range. For decorative, stamped, stained, reinforced, steep-access or demolition-heavy projects, use a higher project-specific quote.
A driveway budget depends on square footage, slab thickness, base preparation, reinforcement, concrete strength, finish, slope and access. Driveways can require more material than patios because of thickness or structural requirements. Use the slab calculator for volume, then add labor and site costs based on your contractor's scope.
Patios are often simpler than driveways, but decorative finishes, curves, steps, grading and backyard pump access can increase the total. A plain rectangular patio with easy truck access is usually easier to estimate than an irregular stamped patio behind a house.
For an irregular footprint, use the related Irregular Shape Concrete Calculator to determine volume before applying Georgia pricing.
For slabs, the core volume calculation is area × thickness. A 4-inch slab uses about 0.01235 cubic yard per square foot before waste. A 6-inch slab uses about 50% more concrete than a 4-inch slab over the same area. That makes thickness one of the biggest material-cost drivers.
Concrete is rarely ordered to the exact theoretical volume. Subgrade variation, form dimensions, spillage, uneven excavation and measurement error can increase actual usage. A user-adjustable allowance of roughly 5% to 10% is common for planning, but the right amount depends on project conditions.
The calculator lets you change the waste percentage instead of assuming one value is correct for every Georgia job.
Give the supplier a realistic order quantity including your chosen allowance.
Ask for the exact strength, slump and additives required.
Confirm delivery, short-load, fuel, environmental, waiting-time and weekend charges.
A lower $/yard price is not always cheaper after fixed fees are added.
For local market context, see Quick Mix Concrete's Metro Atlanta pricing, American Concrete's published 2026 pricing, the Georgia Ready Mixed Concrete Association, and the National Ready Mixed Concrete Association. Always confirm current pricing directly with the supplier before ordering.
Use our Concrete Slab Calculator, Concrete Bag Calculator, Concrete Yard Calculator, Cubic Feet to Cubic Yards, Cubic Yards to Cubic Feet, and Irregular Shape Concrete Calculator to calculate project quantity before pricing your Georgia concrete order.
The ready-mix rate is only one part of a Georgia concrete invoice.
Common questions about ready-mix, cubic yards, delivery and installed concrete prices in Georgia.