Convert Meters to Feet Instantly
Use this Meters to Feet converter to change any metric length in meters (m) into decimal feet (ft) instantly. The calculator also displays feet and inches, inches, centimeters, millimeters and yards, plus a reverse feet-to-meters calculator for fast two-way length conversion.
Convert meters to decimal feet, reverse feet to meters, format meters as feet and inches, or translate one length across multiple metric and imperial units.
Enter a meter value to calculate decimal feet, feet and inches, total inches, centimeters and millimeters.
Decimals are supported, such as 1.75, 2.4 or 0.5 m.
Reverse the conversion using the exact relationship 1 foot = 0.3048 meter.
Convert meters into whole feet plus the remaining inches for height, room dimensions and everyday measurements.
Start with millimeters, centimeters, meters, inches, feet or yards and view equivalent values across all supported units.
Convert meter values to decimal feet without doing the arithmetic manually.
See the same metric length in familiar feet-and-inches notation.
Convert meters to feet or reverse feet back into meters using exact definitions.
Calculator cards, conversion tables and FAQs stay usable on phones and tablets.
The fastest way to convert meters to feet is to multiply the meter measurement by approximately 3.280839895. The same calculation can be written as division by 0.3048 because one international foot is exactly 0.3048 meter. Both formulas describe the same physical length in different units.
Equivalent form: Feet = Meters × 3.280839895013123
For example, to convert 2 meters to feet:
So 2 meters ≈ 6.56168 feet, or roughly 6 feet 6.74 inches.
When you need a quick everyday estimate, multiplying meters by 3.28 is often sufficient. For technical work, drawings, fabrication or repeated calculations, keep more digits or use the calculator above to reduce cumulative rounding error.
Use this five-step method whenever you need to convert a metric length manually.
Write the original measurement in meters.
Remember that one foot is exactly 0.3048 meter.
Divide meters by 0.3048 to get decimal feet.
Round the result only as much as your application allows.
Multiply the fractional foot by 12 if inches are needed.
This chart provides common meter-to-foot values. The table is inside a horizontal wrapper so it remains easy to use on small screens.
| Meters | Feet | Inches | Centimeters |
|---|---|---|---|
| 0.1 m | 0.328084 ft | 3.9370 in | 10 cm |
| 0.25 m | 0.820210 ft | 9.8425 in | 25 cm |
| 0.5 m | 1.640420 ft | 19.6850 in | 50 cm |
| 1 m | 3.280840 ft | 39.3701 in | 100 cm |
| 1.2 m | 3.937008 ft | 47.2441 in | 120 cm |
| 1.5 m | 4.921260 ft | 59.0551 in | 150 cm |
| 1.75 m | 5.741470 ft | 68.8976 in | 175 cm |
| 2 m | 6.561680 ft | 78.7402 in | 200 cm |
| 2.5 m | 8.202100 ft | 98.4252 in | 250 cm |
| 3 m | 9.842520 ft | 118.1102 in | 300 cm |
| 4 m | 13.123360 ft | 157.4803 in | 400 cm |
| 5 m | 16.404199 ft | 196.8504 in | 500 cm |
| 10 m | 32.808399 ft | 393.7008 in | 1000 cm |
| 20 m | 65.616798 ft | 787.4016 in | 2000 cm |
| 50 m | 164.041995 ft | 1968.5039 in | 5000 cm |
| 100 m | 328.083990 ft | 3937.0079 in | 10000 cm |
Values are rounded for display. Use the calculator when you need additional decimal precision.
1 meter equals approximately 3.28084 ft. In feet-and-inches notation, that is about 3 ft 3.37 in. This is the base conversion behind many metric-to-imperial length questions.
1.5 m equals approximately 4.92126 ft, or about 4 ft 11.06 in.
1.7 m equals approximately 5.57743 ft, which is about 5 ft 6.93 in.
1.8 m equals approximately 5.90551 ft, or about 5 ft 10.87 in.
2 m equals approximately 6.56168 ft, or about 6 ft 6.74 in.
3 m equals approximately 9.84252 ft, which is about 9 ft 10.11 in.
The modern international foot is defined as exactly 0.3048 meter. Because the relationship is exact, converting between meters and international feet does not depend on a measured approximation; only the displayed decimal result may be rounded. The reciprocal gives approximately 3.280839895 feet per meter.
This exact relationship also connects several familiar units. Since one foot contains exactly 12 inches and one inch equals exactly 0.0254 meter, twelve inches equal 0.3048 meter. Likewise, three feet equal one yard, so one yard equals 0.9144 meter.
For official background on SI measurement, see the NIST information on SI units of length.
A meter and a foot describe the same dimension using different unit systems. The diagram shows how one meter spans a little more than three feet.
Decimal feet express the full length as one number, for example 5.90551 ft. This format is useful in spreadsheets, engineering calculations, estimating, construction takeoffs and formulas because it behaves like an ordinary decimal value.
To get decimal feet from meters, divide meters by 0.3048. Keep enough decimal places to match the precision of the original measurement.
Feet-and-inches notation separates whole feet from the remaining inches, for example 5 ft 10.87 in. It is often easier to interpret for height, furniture, clearances, room dimensions and everyday measurements.
The third calculator on this page performs this mixed-unit conversion automatically.
First convert meters to total inches by dividing by 0.0254. Then divide the total inches by 12. The whole-number quotient is the number of feet, and the remainder is the number of inches.
For 1.8 meters, the total is about 70.8661 inches. That contains 5 whole feet (60 inches), leaving about 10.8661 inches. Therefore, 1.8 m ≈ 5 ft 10.87 in.
A meter-to-foot conversion appears whenever metric and U.S. customary or imperial-style dimensions meet. Common examples include:
If your starting value is in centimeters instead, use our Centimeters to Feet converter. For smaller imperial measurements, the Inches to Yards converter can help with related length calculations.
The meter-to-foot relationship itself is exact through the definition 1 ft = 0.3048 m, but most decimal-foot answers continue for many digits. Display precision therefore depends on how you round the result.
For everyday dimensions, two decimal places may be enough. For design or estimating, three or four decimals can be more useful. For engineering, surveying or technical calculations, preserve extra digits through intermediate steps and round only the final reported result according to the requirements of the work.
| Unit | Exact / Standard Relationship | Typical Use | Example |
|---|---|---|---|
| Meter (m) | Base SI unit of length | Science, engineering, international measurement | 1 m |
| Foot (ft) | 1 ft = 0.3048 m exactly | Buildings, height, everyday U.S. measurements | 3.28084 ft ≈ 1 m |
| Inch (in) | 1 in = 0.0254 m exactly | Small dimensions and product sizes | 39.37008 in ≈ 1 m |
| Yard (yd) | 1 yd = 0.9144 m exactly | Fabric, landscaping, sports and distance | 1.09361 yd ≈ 1 m |
Length conversions often occur in chains. A project may begin in meters, require feet for planning, and later need inches for detailed dimensions. The multi-unit calculator above avoids repeated manual conversions, while these related tools provide focused calculations:
Quick answers to common m-to-ft and feet-and-inches conversion questions.