Plan Local Concrete Quantity Before You Order
Use this Concrete Calculator in Pasadena, CA to estimate concrete for slabs, patios, driveways, sidewalks, footings, piers, walls and curbs. Calculate cubic yards, cubic feet, cubic meters, approximate concrete bags and optional ready-mix material cost before contacting a local supplier.
Choose the shape that best matches your project and enter actual finished dimensions.
Estimate concrete for rectangular patios, pads, floors and similar slab-on-ground projects.
Material estimate only. Verify thickness, reinforcement, base, joints, drainage, permits and structural requirements separately.
Estimate rectangular driveway, sidewalk, walkway or replacement-panel concrete.
If work touches the public right-of-way, verify Pasadena permits, standard plans and inspection requirements before starting.
Choose a continuous rectangular footing or a round pier / post footing.
Volume only. Footing dimensions, reinforcement, soil bearing, seismic design and structural compliance require project-specific design.
Estimate linear wall, stem wall, curb or similar rectangular concrete sections.
Material volume only. Verify wall, retaining, curb and right-of-way requirements before construction.
Convert project dimensions into the standard ready-mix ordering unit.
Approximate 40, 60 and 80 lb bag quantities for smaller Pasadena projects.
Use a local supplier quote and plan truck access before placement day.
Check Pasadena permits and standard plans when work affects regulated construction or public right-of-way.
A Concrete Calculator in Pasadena helps homeowners, contractors, estimators and property managers turn project dimensions into a practical material quantity. Whether the work is a backyard patio, residential driveway, sidewalk replacement, garage slab, footing, pier, retaining-wall footing or curb section, the starting point is concrete volume.
This Pasadena concrete calculator supports several common shapes because local projects are not all simple slabs. The Slab & Patio calculator handles rectangular flatwork. Driveway & Sidewalk is optimized for longer rectangular pours. Footing & Pier switches between a continuous footing and round pier geometry. Wall & Curb calculates long rectangular concrete sections.
The result shows exact mathematical volume and an adjusted planning quantity after the user-selected extra percentage. It also converts the order into cubic feet, cubic yards and cubic meters, estimates common bag quantities, and can multiply the cubic-yard quantity by a price entered from a local ready-mix quote.
The quantity depends entirely on finished dimensions and thickness. A concrete slab is calculated by multiplying length × width × thickness after putting every measurement into compatible units. Since ready-mix concrete in the United States is normally discussed in cubic yards, cubic feet are divided by 27.
Cubic yards = cubic feet ÷ 27.
A 20 ft × 12 ft patio that is 4 inches thick contains 80 cubic feet of concrete mathematically. That is about 2.96 cubic yards before any extra allowance. The calculator then applies the percentage you enter to create a planning order quantity.
Do not confuse square footage with concrete volume. Square feet describe surface area; concrete orders also require thickness. A 240-square-foot slab at 4 inches thick requires substantially less concrete than the same 240-square-foot slab at 6 inches thick.
Pasadena properties can include older homes, remodels, additions, landscape improvements and replacement flatwork. Common quantity-estimating tasks include patios, walkways, equipment pads, driveway sections, garage floors, foundations, retaining-wall footings and small site improvements.
Concrete quantity is only one part of a compliant construction project. The City of Pasadena Building & Safety Division performs plan review and construction inspection and maintains local code information. Pasadena adopted the 2025 California Building Standards Code with local amendments in late 2025, while statewide 2025 code updates took effect January 1, 2026.
Because city web pages and project records can be updated at different times, contractors and owners should verify the code edition and local amendments that apply to the specific permit. Use the City of Pasadena Codes and Regulations page and Permit Center for current project guidance.
If a concrete project extends into the public right-of-way, quantity calculations should be paired with permit and standard-plan review. Pasadena Public Works maintains a permitting system for public works activity and publishes standard plan drawings.
The City's Standard Plan Drawings include concrete pavement replacement, pavement joint details, driveway configurations, curb and gutter, concrete paving, curb ramps, PCC cross-gutter, PCC sidewalk and PCC pavement jointing details. These drawings are especially relevant when work is not confined to private property.
Review the official Pasadena Public Works Permitting page and Standard Plan Drawings before starting regulated public improvements.
For a basic rectangular patio, measure the finished length and width inside the forms and enter the planned thickness. If the patio is L-shaped, divide it into rectangles, calculate each section and add the volumes. If it contains a circular section, use the Round Concrete Slab Calculator.
Before placing concrete, verify grading and drainage. A material calculator cannot tell you where runoff should go or whether a patio elevation conflicts with doors, vents, weep screeds, property drainage or other building details.
For a pool-area project, use the Concrete Pool Deck Calculator. For a tapered transition, use the Concrete Wedge Calculator.
A driveway quantity estimate needs length, width and thickness. If the driveway changes width, calculate separate sections rather than using one rough dimension. Thickened edges, aprons, curb transitions or replacement panels should also be calculated separately if their geometry differs.
Do not use this page to select driveway thickness or reinforcing. Vehicle loading, base conditions, jointing, site drainage, project plans and public-works details can all matter. If the work reaches the city sidewalk, curb or street interface, confirm the applicable City of Pasadena requirements before demolition or placement.
For joint planning after the dimensions are known, use the Concrete Joint Spacing Calculator and Concrete Saw Cut Calculator.
Continuous footings use rectangular volume. The calculator converts footing width and depth from inches into feet, multiplies them by length and then converts the result to cubic yards.
Round piers use cylinder geometry. Their volume equals π × radius² × depth × quantity. Enter the actual diameter and depth shown on the project design rather than choosing a size from the calculator.
Diameter must be divided by two to obtain radius.
For preliminary footing geometry calculations, use the Concrete Footing Size Calculator. For reinforcing placement, see the Concrete Cover Calculator and Concrete Rebar Spacing Calculator.
Concrete prices are not hard-coded into this calculator because local material prices, minimum-load policies, fuel charges, delivery zones, mix specifications, weekend or after-hours service, waiting time and pumping can change. Enter the price per cubic yard from a current local supplier quote to calculate a simple material estimate.
The resulting cost covers only the entered cubic-yard rate. It does not automatically include labor, reinforcement, forms, base material, demolition, haul-off, pumping, line-pump setup, short-load charges, permits, inspections, finishing or curing.
For delivery logistics, use the Concrete Delivery Distance Calculator. For placement duration, use the Concrete Pour Time Calculator.
Small repairs and pads may be practical with bagged concrete. Large patios, driveways and foundation pours can require many bags, which increases handling and mixer-cycle time. The calculator provides approximate counts for 40 lb, 60 lb and 80 lb bags using typical planning yields, but the actual bag yield printed by the manufacturer should control purchasing.
If a project needs many mixer batches, use the Concrete Mixer Size Calculator to compare mixer capacity and approximate batch count. For ready-mix work, coordinate delivery rate with your crew and placement method so concrete does not arrive faster than it can be handled.
Warm, dry or windy placement conditions can increase surface moisture loss and reduce the time available for placing and finishing concrete. Weather conditions should therefore be part of pour-day planning, especially on exposed slabs.
Use the Concrete Hot Weather Calculator to compare air temperature, concrete temperature, humidity and wind inputs for planning. The actual hot-weather concrete plan should follow the concrete supplier, project specifications and applicable professional guidance.
Concrete requires a thickness dimension. Square footage alone cannot determine cubic yards.
A 4-inch slab is 0.3333 foot thick, not 4 feet.
Turn-down edges, footings, curbs and thickened strips can add significant volume beyond the main slab.
Excavation and forming can change project dimensions. Calculate from final geometry before ordering when possible.
The volume estimate does not authorize construction or determine code compliance.
| Project | Dimensions | Exact Volume | Before Extra Allowance |
|---|---|---|---|
| Small Patio | 10 × 10 ft × 4 in | 33.33 ft³ | 1.23 yd³ |
| Patio | 20 × 12 ft × 4 in | 80.00 ft³ | 2.96 yd³ |
| Walkway | 40 × 4 ft × 4 in | 53.33 ft³ | 1.98 yd³ |
| Driveway Section | 30 × 12 ft × 5 in | 150.00 ft³ | 5.56 yd³ |
| Garage Slab | 20 × 20 ft × 4 in | 133.33 ft³ | 4.94 yd³ |
These examples are mathematical references only. Calculate your actual dimensions and project thickness.
Use the Concrete Volume Calculator for general geometry, the Round Concrete Slab Calculator for circular pads, and the Concrete Cubic Yard Calculator for direct yard conversions.
For reinforcing, see the Concrete Rebar Calculator, Concrete Rebar Spacing Calculator and Concrete Cover Calculator. For scheduling and logistics, use the Concrete Pour Time Calculator and Concrete Delivery Distance Calculator.
Measure final dimensions, convert them to volume, plan delivery access and verify City requirements where applicable.
Common questions about concrete yards, bags, local permits and Pasadena project planning.