Convert Square Meters to Square Feet Instantly
Use this Square Meters to Square Feet converter to change area from square meters (m²) into square feet (ft²) with fast, precise results. Enter any decimal value, use the reverse converter, combine mixed measurements, or compare the same area across common metric and customary units.
Convert m² to ft², reverse square feet to square meters, combine mixed area values, or convert one value across several common area units.
Enter square meters to calculate the equivalent area in square feet and other useful units.
Decimals are supported, such as 0.5 or 18.75 m².
Reverse the conversion using 1 square foot = 0.09290304 square meters.
Useful when plans or measurements mix metric and U.S. customary area units.
Enter one area value and choose its unit to convert it into square meters, square feet, square yards, acres and hectares.
Square meters and square feet both measure two-dimensional area, but they belong to different measurement systems. Square meters are the standard SI-derived unit used for floor areas, rooms, buildings, construction drawings and property sizes in most of the world. Square feet are widely used in the United States and in many real-estate, flooring and construction contexts where customary units are preferred.
The conversion is based on the internationally defined foot. One foot equals exactly 0.3048 meter, so one square foot equals exactly 0.09290304 square meter. Reversing that relationship gives approximately 10.7639104167 square feet in one square meter.
Example: 25 m² × 10.7639104167 = 269.0977604175 ft².
Example: 500 ft² × 0.09290304 = 46.45152 m².
A square meter is the area of a square that is one meter long on each side. A square foot is the area of a square that is one foot long on each side. Because area is squared, you cannot convert m² to ft² by using the simple linear meter-to-foot factor of about 3.28084. The linear factor must be squared, producing about 10.76391.
The following square meters to square feet chart covers common room, apartment, office and project areas. The table is wrapped for horizontal scrolling on smaller screens.
| Square Meters | Square Feet | Square Yards | Acres |
|---|---|---|---|
| 0.5 m² | 5.381955 ft² | 0.597995 yd² | 0.000124 ac |
| 1 m² | 10.763910 ft² | 1.195990 yd² | 0.000247 ac |
| 2 m² | 21.527821 ft² | 2.391980 yd² | 0.000494 ac |
| 5 m² | 53.819552 ft² | 5.979950 yd² | 0.001236 ac |
| 10 m² | 107.639104 ft² | 11.959900 yd² | 0.002471 ac |
| 20 m² | 215.278208 ft² | 23.919801 yd² | 0.004942 ac |
| 25 m² | 269.097760 ft² | 29.899751 yd² | 0.006178 ac |
| 50 m² | 538.195521 ft² | 59.799502 yd² | 0.012355 ac |
| 75 m² | 807.293281 ft² | 89.699253 yd² | 0.018533 ac |
| 100 m² | 1,076.391042 ft² | 119.599005 yd² | 0.024711 ac |
| 150 m² | 1,614.586563 ft² | 179.398507 yd² | 0.037066 ac |
| 200 m² | 2,152.782083 ft² | 239.198009 yd² | 0.049421 ac |
| 500 m² | 5,381.955208 ft² | 597.995023 yd² | 0.123553 ac |
| 1,000 m² | 10,763.910417 ft² | 1,195.990046 yd² | 0.247105 ac |
12 × 10.7639104167 = 129.166925 ft².
30 × 10.7639104167 = 322.917313 ft².
60 × 10.7639104167 = 645.834625 ft².
120 × 10.7639104167 = 1,291.669250 ft².
The same formula works for decimal measurements. For example, 18.5 m² converts to about 199.1323427 ft². Keeping several decimal places during the calculation is helpful when dimensions come from architectural drawings, surveys or detailed material estimates.
The relationship comes from the exact international definition of the foot: 1 foot = 0.3048 meter. Therefore, 1 ft² = 0.3048 × 0.3048 = 0.09290304 m². Dividing one square meter by 0.09290304 yields about 10.7639104167 ft².
This is an area conversion, so both dimensions are converted. A one-meter-by-one-meter square is approximately 3.28084 feet by 3.28084 feet. Multiplying those two side lengths gives approximately 10.76391 square feet.
For background on SI measurements and unit relationships, see the NIST SI Units guidance.
A 1 m × 1 m square has an area of 1 m², which is approximately 10.7639 ft².
This conversion is especially useful in real estate, architecture, construction, flooring, interior design and international property comparisons. A home listing may state floor area in square meters while a buyer, contractor or software tool expects square feet. Converting the area allows both measurements to be compared on the same basis.
For example, a 90 m² apartment is approximately 968.752 ft². A 150 m² house is approximately 1,614.587 ft². For renovation work, a 20 m² room covers about 215.278 ft² before adding any allowance for waste, cuts or installation conditions.
The conversion changes only the unit used to describe an area. It does not change the physical size of a room, lot, floor or surface.
A square meter is the area of a square measuring one meter by one meter. A square foot is the area of a square measuring one foot by one foot. Both are area units, not length units.
Square meters are larger units: one m² contains about 10.7639 ft². Because of this, the numerical value in square feet is usually larger than the same physical area expressed in square meters. For example, 50 m² and about 538.196 ft² describe the same area.
To reverse the conversion, multiply square feet by 0.09290304. This reverse factor is exact under the international foot definition. For example, 1,000 ft² × 0.09290304 = 92.90304 m². You can also divide square feet by approximately 10.7639104167.
Using the reverse calculator above avoids unnecessary rounding and is particularly convenient for property listings, floor plans and material coverage values that are already stated in square feet.
That is the meter-to-foot length factor. Area needs about 10.76391.
Feet measure length; square feet measure area.
Keep extra decimals until the final displayed result.
Mixed m² and ft² values must first be converted to a common area unit.
Floor area is one of the most common reasons to convert m² to ft². If a room measures 4 m by 5 m, its area is 20 m². Converting 20 m² gives approximately 215.278 ft². That area can then be compared with product coverage stated in square feet.
For purchasing flooring, tile, carpet or similar materials, the converted floor area is only the measured base area. Real projects often need additional material for cuts, pattern matching, damaged pieces or installation waste. The appropriate allowance depends on the product and layout, so treat the converter as an area-unit tool rather than a purchasing estimator.
International real-estate listings often present residential or commercial floor area in square meters. Converting to square feet makes it easier for readers accustomed to U.S. property measurements to compare homes and offices. A 70 m² unit is about 753.474 ft², 100 m² is about 1,076.391 ft², and 200 m² is about 2,152.782 ft².
When comparing properties, confirm what the reported floor area includes. Some listings may include balconies, shared areas, garages or wall thicknesses differently. A precise unit conversion cannot resolve differences in how the original area was measured.
For more area conversions, use related pages such as Square Feet to Square Meters, Square Meters to Square Yards, Square Meters to Acres, Acres to Square Feet, Hectares to Square Feet and Square Feet to Acres. These tools help when plans, listings and estimates use different area units.
Quick answers about m², ft² and area conversions.