Convert ft to mi Instantly
Use this Feet to Miles converter to change feet into statute miles quickly and accurately. One international mile contains exactly 5,280 feet, so converting feet to miles is as simple as dividing by 5,280.
Convert feet to miles, reverse miles to feet, combine feet with extra inches, or compare one length across feet, miles, yards, inches, meters and kilometers.
Enter a distance in feet. The calculator divides by 5,280 and also shows yards, meters and kilometers.
Use zero or any positive decimal distance.
Reverse the conversion by multiplying miles by 5,280, with related results in yards, inches, meters and kilometers.
Combine a mixed feet-and-inches measurement, then convert the total length to miles and other useful units.
Enter a length and choose the starting unit to compare feet, miles, yards, inches, meters and kilometers at once.
To convert feet to miles, divide the number of feet by 5,280. The relationship is fixed for the international foot and international statute mile, so the arithmetic is direct and does not depend on the object, route or project being measured.
Example: 7,920 ft ÷ 5,280 = 1.5 mi.
The reason the result becomes numerically smaller is that a mile is a much larger unit than a foot. Thousands of feet fit inside only a small number of miles. If you are converting a long walking route, road distance, property measurement, pipeline length, cable run or engineering dimension, the same formula applies.
You can also write the conversion as multiplication by the reciprocal: miles = feet × 0.000189393939.... Dividing by 5,280 is usually easier to remember and avoids unnecessary rounding of the repeating decimal factor.
The following feet to miles chart includes common values plus related yards and meters. The table is inside a responsive wrapper so it can scroll horizontally on narrow mobile screens.
| Feet | Miles | Yards | Meters |
|---|---|---|---|
| 1 ft | 0.000189394 mi | 0.333 yd | 0.305 m |
| 10 ft | 0.001893939 mi | 3.333 yd | 3.048 m |
| 100 ft | 0.018939394 mi | 33.333 yd | 30.480 m |
| 500 ft | 0.094696970 mi | 166.667 yd | 152.400 m |
| 1,000 ft | 0.189393939 mi | 333.333 yd | 304.800 m |
| 1,320 ft | 0.250000000 mi | 440.000 yd | 402.336 m |
| 2,640 ft | 0.500000000 mi | 880.000 yd | 804.672 m |
| 5,280 ft | 1.000000000 mi | 1,760.000 yd | 1,609.344 m |
| 10,560 ft | 2.000000000 mi | 3,520.000 yd | 3,218.688 m |
| 26,400 ft | 5.000000000 mi | 8,800.000 yd | 8,046.720 m |
| 52,800 ft | 10.000000000 mi | 17,600.000 yd | 16,093.440 m |
| 100,000 ft | 18.939393939 mi | 33,333.333 yd | 30,480.000 m |
For values not listed in the chart, enter any decimal or whole-number distance in the calculator above. For example, 3,300 feet is 0.625 mile, while 13,200 feet is 2.5 miles.
500 ÷ 5,280 ≈ 0.094697 mi.
1,320 ÷ 5,280 = 0.25 mi.
2,640 ÷ 5,280 = 0.5 mi.
10,560 ÷ 5,280 = 2 mi.
These examples show several useful landmarks. A quarter mile is 1,320 feet, a half mile is 2,640 feet, and two miles are 10,560 feet. Remembering those values can make quick mental estimates much easier.
The modern statute mile preserves an older chain of English length relationships. In current international-unit practice, the important conversion is the defined relationship itself: 1 mile = 5,280 feet. NIST conversion tables list the international mile as 5,280 international feet and 1,609.344 meters.
For everyday conversions, you do not need to reconstruct the historical chain of furlongs, chains or rods. Use the exact 5,280-foot factor directly. That keeps the calculation simple and reduces the chance of mixing modern international units with historical survey definitions.
The reverse calculation uses multiplication rather than division. Multiply miles by 5,280 to obtain feet.
Example: 3.25 mi × 5,280 = 17,160 ft.
This reverse formula is useful when a route, parcel boundary, trail or roadway specification is stated in miles but your working drawing or field measurements are in feet. You can also use the second calculator tab above to perform the conversion automatically.
Feet, yards and miles are closely related customary length units. There are exactly 3 feet in a yard and 1,760 yards in a mile. Since 1,760 × 3 = 5,280, the yard and foot relationships agree exactly.
If you work frequently between these units, our Yards to Feet converter and Miles to Feet converter can help keep the direction of each conversion clear.
One foot contains exactly 12 inches. Therefore, one mile contains 5,280 × 12 = 63,360 inches. If a measurement contains both feet and inches, first convert the inches to feet, add the two parts, then convert the total feet to miles.
Example: 1,000 ft 6 in = 1,000.5 ft ≈ 0.189489 mi.
The mixed-unit calculator above performs that sequence automatically. This can be useful for measured runs, site dimensions and fabrication records where the source measurement is written in feet and inches rather than decimal feet.
The international foot is defined as exactly 0.3048 meter. Because one mile contains 5,280 feet, one international mile equals exactly 1,609.344 meters or 1.609344 kilometers. These exact relationships make it straightforward to move between customary and metric length systems.
| Unit | Exact / Standard Relationship | Use |
|---|---|---|
| 1 foot | 0.3048 meter | Short customary length |
| 1 yard | 0.9144 meter | Medium customary length |
| 1 mile | 1,609.344 meters | Long customary distance |
| 1 kilometer | 1,000 meters | Long metric distance |
For direct cross-system conversions, see the Feet to Meters converter, Meters to Feet converter, and Feet to Inches converter.
Select feet to miles, miles to feet, mixed feet and inches, or the multi-unit length converter.
Type a whole number or decimal value. The calculator accepts zero and positive values.
Press the Calculate button. The dark result panel opens after the input passes validation.
Review related units such as yards, meters and kilometers, then download the displayed result as a PDF if needed.
For feet to miles, divide by 5,280. Multiplication is used for the reverse miles-to-feet direction.
1,760 is the number of yards in a mile, not feet. Feet require the 5,280 factor.
If the source contains feet and inches, convert the inches portion before dividing by 5,280.
Keep extra decimal places during the calculation, especially for distances well below one mile.
A feet to miles calculator can be useful in surveying, civil work, road and trail planning, sports, running and walking distances, utilities, fencing, pipeline planning, property measurements, mapping, aviation support work, construction layouts and long cable runs. In many of these settings, detailed field measurements are recorded in feet while summaries or public-facing descriptions are easier to communicate in miles.
The conversion changes only the unit used to express the distance. It does not change the actual physical length. It also does not calculate route geometry, elevation change, slope, curvature or travel time. If you are measuring a real-world route, obtain the correct route length first and then use this converter to change its unit.
Distances below one mile are often easier to understand as familiar fractions. For example, 1,320 feet is one quarter mile, 2,640 feet is one half mile, and 3,960 feet is three quarters of a mile. Calculators, spreadsheets and engineering software, however, usually work more conveniently with decimal miles.
If your result is 0.625 mile, you can leave it as a decimal for calculation or recognize it as five-eighths of a mile for communication. Which format is best depends on the context. For data processing, keep enough decimal precision to match the quality of the original measurement.
For modern general-purpose conversions, this page uses the international foot. NIST documentation distinguishes the international foot from the former U.S. survey foot used historically in some geospatial work. The numerical difference is very small, but specialized legacy survey data may require attention to the unit definition recorded with the dataset.
If your work involves legal boundaries, historical geodetic records or legacy survey coordinates, follow the unit specification of the governing dataset or authority. For ordinary construction, road-distance, sports and everyday length conversion, the standard international foot-to-mile relationship shown here is appropriate.
The conversion relationship between international feet and international miles is exact, but measured distances are not automatically exact. A field measurement recorded as 1,000 ft may have less precision than one recorded as 1,000.000 ft. Your final number of decimal places should reflect the quality of the input and the needs of the task.
For quick estimates, three to six decimal places in miles are often enough for sub-mile distances. For engineering or data-processing workflows, keep more digits during intermediate steps and round only the final displayed result. The calculators on this page retain additional precision internally.
For authoritative conversion information, consult the NIST Guide to the SI conversion factors, which lists the international mile as 5,280 international feet and 1,609.344 meters. For SI definitions and the metre, see the BIPM SI Brochure.
Continue with related tools such as the Miles to Feet converter, Yards to Feet converter, Feet to Meters converter, Feet to Inches converter, Meters to Yards converter, and Millimeters to Inches converter. Keeping the unit direction clear helps prevent errors when dimensions from drawings, maps, specifications and field notes use different measurement systems.
The diagram shows the exact relationship between feet, yards and one international statute mile without crowding the figure labels.
Quick answers about feet, miles, yards, inches, meters, mixed measurements and conversion accuracy.