2026 Ready-Mix & Installed Concrete Planning
Estimate concrete cost in Utah for ready-mix orders, slabs, patios and driveways. Current 2026 Utah planning guides place ordinary ready-mix near $127–$162 per cubic yard in many situations, but actual delivered prices vary by mix, order size, plant distance, elevation, access and local demand. The calculator starts with an editable $145/yd³ planning rate so you can replace it with a current supplier quote.
Estimate ready-mix material cost by cubic yards, calculate a slab or patio from dimensions, estimate a driveway, or compare low/planning/high ready-mix budget scenarios.
Enter cubic yards, your local quoted price per yard, waste allowance and delivery or short-load fees.
Calculate concrete yardage from dimensions, then add ready-mix, delivery and an editable labor/finish allowance.
Estimate driveway yardage, ready-mix budget and an optional installed-work allowance from square footage and thickness.
Compare low, planning and high material-rate scenarios. These are budgeting scenarios, not supplier quotes.
Concrete cost in Utah is not one fixed statewide number. A 2026 Utah pricing guide places delivered ready-mix around $127 to $162 per cubic yard for many ordinary orders. That is a useful planning range, not a supplier quote. Salt Lake County, Utah County, Weber County, Washington County and resort or mountain communities can all produce different delivered prices because plant distance, traffic, elevation, mix design and order size vary.
This page uses $145 per cubic yard as an editable midpoint in the calculators. If a supplier gives you $138, $152 or another rate, enter that number instead. The most accurate budget starts with a measured quantity and a current local quote.
Planning context: current 2026 Utah ready-mix cost guidance. Actual delivered rates can differ materially by supplier and project.
The cubic-yard rate is the main material input for a ready-mix budget. If your project requires 6 cubic yards and your quoted rate is $145 per yard, the base material value is $870. Add a 10% ordering allowance and the planning quantity becomes 6.6 cubic yards, or about $957 at the same rate before delivery, short-load, pumping, tax or other charges.
Adjusted yards = measured yards × (1 + selected allowance percentage).
Long hauls from a batch plant, canyon routes and site access can increase delivered cost.
Mountain locations can add travel, scheduling and cold-weather placement considerations.
Higher PSI, fibers, accelerators and specialty admixtures may change the per-yard quote.
Excavation, gravel base, forms, steel, pumping and finishing often cost more than the raw mix.
The table below uses a $145 per cubic yard planning rate plus 10% volume allowance. It is material-only and does not include delivery, short-load fees, pumping, reinforcement, labor, finishing, permits or tax.
| Base Volume | Adjusted Volume (+10%) | Material @ $145/yd³ | Possible Project Scale |
|---|---|---|---|
| 1 yd³ | 1.10 yd³ | $160 | Small pad or repair volume |
| 2 yd³ | 2.20 yd³ | $319 | Small patio or footings |
| 3 yd³ | 3.30 yd³ | $479 | Patio or shed slab |
| 5 yd³ | 5.50 yd³ | $798 | Medium slab or patio |
| 7 yd³ | 7.70 yd³ | $1,117 | Driveway section or larger slab |
| 10 yd³ | 11.00 yd³ | $1,595 | Larger residential pour |
| 15 yd³ | 16.50 yd³ | $2,393 | Large driveway or foundation work |
| 20 yd³ | 22.00 yd³ | $3,190 | Larger residential/light commercial volume |
Installed concrete slab cost is different from ready-mix cost. A current 2026 Utah slab guide estimates a typical 1,200-square-foot slab foundation at roughly $7.31 to $15.74 per square foot installed, depending on excavation, gravel base, vapor barrier, reinforcement, formwork, thickness and finish. A separate planning-grade 2026 cost index places ordinary Utah slab work around roughly $5.88 to $11.76 per square foot, showing how scope strongly affects the number.
For patios, garage floors and walkways, always compare quotes with the same inclusions. One contractor may include grading and rebar while another quote may be placement and finish only. The slab calculator above therefore keeps the labor/finish rate editable.
At $145/yd³ with 10% extra, adjusted volume is 5.5 yd³ and material is about $797.50 before delivery and other fees.
Base volume is about 1.23 yd³. With 10% extra, the planning quantity is about 1.36 yd³ before applying your supplier rate.
Base volume is about 7.41 yd³. With 10% extra, the planning quantity is about 8.15 yd³.
For Park City, canyon or remote jobs, confirm truck access, travel charges, winter restrictions and pump needs before relying on a material-only estimate.
The ready-mix price is only one part of an installed concrete budget.
Salt Lake City, West Valley City, Sandy, Draper and nearby Wasatch Front communities have strong ready-mix availability, but delivered price still changes with plant location, traffic, order timing, PSI and project access. Urban sites can also add pump or wheelbarrow labor when a mixer truck cannot discharge close to the forms.
For driveways and exterior flatwork, freeze-thaw exposure, drainage and deicing conditions can matter to the concrete specification and finishing plan. Quantity calculators determine volume only; they do not choose the required mix design.
Utah County and Weber/Davis County projects use the same cubic-yard formulas, but supplier pricing and delivery zones differ. For Provo, Orem, Lehi, Ogden, Layton and surrounding communities, obtain a quote tied to the actual job address, required strength, quantity and discharge method.
Rapid development can also affect scheduling. A lower headline price per yard may not be the lowest delivered project cost if it comes with a higher short-load charge, longer haul, waiting fee or limited pour-time availability.
St. George and Washington County have hotter placement conditions than many northern Utah locations. Warm concrete, sun, wind and low humidity can increase evaporation from fresh concrete and shorten finishing time. Crew size, truck spacing, curing and admixture choices can therefore affect installed cost even when the cubic-yard rate is similar.
Use current supplier guidance and project specifications for hot-weather placement. The calculator is a budget tool, not a replacement for mix-design or curing requirements.
Mountain work can carry different logistics from valley projects. Steep access, longer travel, winter weather, limited staging, pump requirements and scheduling constraints can increase delivered or installed concrete cost. Resort-area labor and project-management costs may also be higher than statewide averages.
For mountain projects, ask suppliers about maximum haul time, seasonal delivery policies, truck access, standby charges and whether pumping is likely to be required.
Utah's State Construction Code is established in Title 15A. The Utah Legislature lists specific adopted national model-code editions and statewide amendments effective July 1, 2026. Local building departments administer permits and inspections for many private projects, so verify the requirements for the exact city or county before construction.
If a driveway or site connection affects a state highway, UDOT states that a Conditional Access Permit is required when a driveway or local street connection is requested, and construction within UDOT right-of-way requires an encroachment permit. Local streets are handled by the relevant city or county rather than UDOT.
Utah does not have one single combined sales-tax rate for every address. The Utah State Tax Commission publishes 2026 combined rate charts and a location lookup tool because state, local, county, transit and other components vary by jurisdiction. The Tax Commission also notes that separately stated delivery charges can have different sales-tax treatment from the underlying sale.
For budgeting, ask the supplier or contractor whether tax is included in the quoted total. Do not simply multiply every project estimate by one statewide percentage.
Utah has a wide range of placement conditions. Northern and high-elevation jobs can face freezing temperatures and snow, while summer pours along the Wasatch Front or in southern Utah can be hot and dry. Weather does not change the geometric cubic-yard calculation, but it can affect scheduling, protection, finishing and curing.
Use project specifications and current weather conditions. For technical guidance, the American Concrete Institute publishes resources for both cold-weather and hot-weather concreting.
Before calling a ready-mix producer or contractor, calculate the expected cubic yards and gather the job ZIP code, pour date, PSI, thickness, finish, access conditions and pump requirements. Ask whether the quote includes delivery, fuel surcharge, short-load charges, waiting time, admixtures and applicable tax.
For installed work, confirm whether excavation, base material, compaction, forms, reinforcement, joints, curing, sealing, demolition and cleanup are included. Comparing the same scope is more useful than comparing only the headline price per yard or square foot.
This page uses current 2026 planning context from a Utah ready-mix cost guide and Utah slab-cost reports, while official regulatory references come from the Utah State Tax Commission, UDOT Conditional Access Permit guidance, UDOT encroachment permits, and the Utah State Construction Code.
Pricing changes with cement, aggregate, diesel, labor, season and local demand. For that reason, the calculators are designed around editable inputs rather than a fixed statewide quote.
For quantity planning before pricing, use the Square Concrete Calculator, Concrete Bags to Cubic Yards calculator, Cubic Feet to Concrete Bags calculator, Gravel Calculator for Concrete, Cubic Yards to Cubic Feet converter, or Cubic Meters to Cubic Yards converter. Accurate quantity comes first; then apply a current Utah rate.
Quick answers about Utah concrete prices, ready-mix, slabs, driveways, delivery, permits and weather.