Estimate Concrete Prices Across South Carolina
Use this Concrete Cost in South Carolina calculator to estimate ready-mix material, cubic yards, delivery and short-load fees, pump charges, labor, and total installed slab cost. Enter your own supplier quote for the most accurate estimate, or start with a practical planning price and adjust it for Greenville, Columbia, Charleston, Spartanburg, Myrtle Beach, Rock Hill, or your local South Carolina market.
Estimate a slab from dimensions, price known cubic yards, calculate installed cost by square foot, or compare two supplier quotes side by side.
Calculate cubic yards, waste allowance, ready-mix material, fixed fees, labor and estimated total project cost.
Replace with your current South Carolina supplier quote.
Use this when you already know the cubic yards required and only need a delivered-material budget.
Create a low-high budget for a slab, patio, walkway, garage floor or driveway using installed square-foot pricing.
Compare two ready-mix quotes using the same yardage while including each supplier's fixed fees.
Concrete pricing in South Carolina depends on more than a statewide average. Ready-mix design, strength, order quantity, delivery distance, truck minimums, pump access, reinforcement, site preparation, labor and finishing can all change the final invoice.
A May 2026 Upstate South Carolina guide places delivered ready-mix around $160–$195 per cubic yard as a realistic starting range. A separate 2026 regional calculator centered on Columbia, SC places plain installed concrete around $4–$10 per square foot. These figures are planning benchmarks, not guaranteed quotes.
| Cost Component | What It Covers | Why It Changes | Estimator Input |
|---|---|---|---|
| Ready-mix concrete | Material per cubic yard | PSI, mix design, supplier, market | $/yd³ |
| Delivery | Truck dispatch and travel | Distance, traffic, plant location | Fixed fee or included |
| Short-load fee | Charge for smaller orders | Supplier minimum and yardage | Fixed fee |
| Pump / equipment | Concrete placement equipment | Access, hose reach, job size | Fixed or hourly |
| Labor / finishing | Place, screed and finish concrete | Crew, finish level, complexity | $/ft² |
| Reinforcement | Rebar, mesh or fibers | Project requirements | Separate allowance |
| Site work | Excavation, grading and base prep | Soil, slope, drainage, access | Separate allowance |
There is no single permanent statewide price. Current 2026 Upstate South Carolina guidance puts delivered ready-mix around $160–$195 per cubic yard as a starting range. Older local Columbia guidance has cited a wider material range around $125–$175 per yard, illustrating how date, location, mix and delivery assumptions can shift the number.
For preliminary budgeting, this calculator starts at $180 per cubic yard, near the middle of the current Upstate planning range. Replace it with your actual quote before ordering.
Use feet for length and width, and inches for slab thickness.
Add delivery, short-load, pump, additives and labor separately.
A 20 ft × 20 ft slab at 4 inches thick contains about 4.94 cubic yards before waste. With an 8% allowance, the order quantity is about 5.33 cubic yards. At a planning material rate of $180 per cubic yard, the ready-mix portion is roughly $959 before delivery, short-load charges, pumping, reinforcement, site work or labor.
If labor and finishing were budgeted separately at $6 per square foot, the 400-square-foot slab would add $2,400 in labor/finishing before other project-specific costs. The calculator above lets you change every assumption instead of forcing a one-size-fits-all total.
Greenville, Spartanburg, Anderson, Greer and nearby Upstate communities have an active ready-mix market. A May 2026 Upstate South Carolina guide says delivered concrete typically starts around $160–$195 per cubic yard, with final cost affected by mix design, order size, truck travel and access.
Carolina Concrete serves the Upstate and Midlands, while suppliers such as Sandlapper Concrete and Metrocon also serve the Upstate market. Many suppliers quote projects directly rather than posting a fixed retail rate, so compare the complete delivered invoice.
For Columbia and the Midlands, a 2026 regional planning calculator centered on ZIP 29201 estimates plain concrete projects at about $4–$10 per square foot installed, depending on project specifics and local conditions. Installed cost includes much more than ready-mix alone.
Concrete Supply Co. operates throughout both North and South Carolina, and Carolina Concrete serves the Midlands as well. Ask for the mix price, delivery terms and small-order charges separately when comparing Columbia-area quotes.
Charleston, Summerville, Mount Pleasant and surrounding Lowcountry communities have multiple ready-mix suppliers, including Knight's Redi-Mix, Port City Concrete and Van-Smith Concrete. These companies generally use quote requests rather than one public statewide price.
Truck access, pump placement, travel time, job-site staging and order size can influence the final Charleston-area cost. Compare the total delivered price and any waiting-time or pump charges.
Small orders often cost more on an effective per-yard basis because the supplier still has to batch, dispatch and deliver a truck. The current Upstate South Carolina pricing guide specifically notes that small pours can cost more per yard even when the base concrete is similar.
Mix design can change concrete cost. Higher strength, air entrainment, fibers, accelerators, waterproofing admixtures and decorative requirements can all affect a South Carolina quote. A driveway mix and a basic walkway mix may not be priced the same even at identical yardage.
Use the strength and mix specified by the plans, contractor or engineer rather than selecting concrete solely by the lowest price.
A 2026 South Carolina regional estimator places plain installed concrete around $4–$10 per square foot. Actual contractor bids can be lower or higher depending on forming, reinforcement, excavation, demolition, access, finish, thickness and project size.
Use the green calculator above to model a low-high budget. Decorative, stamped, stained, reinforced or difficult-access concrete should be priced from a project-specific quote.
A driveway budget depends on square footage, slab thickness, base preparation, reinforcement, concrete strength, finish, slope and access. Driveways can require more material than patios because of thickness or structural requirements. Use the slab calculator for volume, then add labor and site costs based on your contractor's scope.
Patios are often simpler than driveways, but decorative finishes, curves, steps, grading and backyard pump access can increase the total. A plain rectangular patio with easy truck access is usually easier to estimate than an irregular stamped patio behind a house.
For an irregular footprint, use the related Irregular Shape Concrete Calculator to determine volume before applying South Carolina pricing.
For slabs, the core volume calculation is area × thickness. A 4-inch slab uses about 0.01235 cubic yard per square foot before waste. A 6-inch slab uses about 50% more concrete than a 4-inch slab over the same area. That makes thickness one of the biggest material-cost drivers.
Concrete is rarely ordered to the exact theoretical volume. Subgrade variation, form dimensions, spillage, uneven excavation and measurement error can increase actual usage. A user-adjustable allowance of roughly 5% to 10% is common for planning, but the right amount depends on project conditions.
The calculator lets you change the waste percentage instead of assuming one value is correct for every South Carolina job.
Give the supplier a realistic order quantity including your chosen allowance.
Ask for the exact strength, slump and additives required.
Confirm delivery, short-load, fuel, environmental, waiting-time and weekend charges.
A lower $/yard price is not always cheaper after fixed fees are added.
For current market context, see the 2026 Upstate South Carolina concrete price guide, the 2026 South Carolina regional cost estimator, Carolina Concrete, Concrete Supply Co., the Carolinas Ready Mixed Concrete Association, and the National Ready Mixed Concrete Association. Always confirm current prices and fees directly before ordering.
Use our Concrete Slab Calculator, Concrete Bag Calculator, Concrete Yard Calculator, Cubic Feet to Cubic Yards, Cubic Yards to Cubic Feet, and Irregular Shape Concrete Calculator to calculate project quantity before pricing your South Carolina concrete order.
The ready-mix rate is only one part of a South Carolina concrete invoice.
Common questions about ready-mix, cubic yards, delivery and installed concrete prices in South Carolina.