Estimate Concrete for Austin Slabs, Driveways, Patios, Footings & Foundations
Use this free Concrete Calculator in Austin to estimate cubic feet, cubic yards, concrete bags, truck loads and editable material cost for residential and commercial concrete projects in Austin and nearby Central Texas communities.
Choose a slab, footing, wall or delivery/cost calculation and enter your project dimensions.
Estimate concrete for patios, driveways, garage floors, sidewalks and rectangular slabs.
Estimate square or rectangular footings, post bases and isolated foundation pads.
Estimate concrete for straight walls, curbs, raised borders and similar rectangular sections.
Convert known concrete volume into bag quantities, truck loads and an editable material-cost estimate.
Concrete prices, truck capacities, short-load fees and delivery charges vary. Use a current Austin-area supplier quote.
Estimate concrete for driveways, patios and garage floors.
Calculate repeated foundation pads and post-support concrete.
Estimate straight concrete walls, curbs and rectangular sections.
Convert volume into bags, trucks and editable current pricing.
A Concrete Calculator in Austin starts with finished concrete dimensions. Measure the actual slab, footing, wall or pad rather than the entire excavation, gravel base or work zone. Select the project type above and enter the dimensions.
The calculator converts cubic feet into cubic yards and applies an optional planning allowance. Small projects can be translated into bag quantities, while larger pours can be checked against truck capacity and current supplier pricing.
Use finished concrete dimensions.
Choose slab, footing, wall or delivery.
Get cubic feet and cubic yards.
Account for normal field variation.
Confirm supplier, permit and inspection requirements.
Rectangular slabs use length × width × thickness. If length and width are measured in feet and thickness is entered in inches, divide thickness by 12 before multiplication.
Use finished dimensions for patios, driveway sections, garage floors and other flatwork.
A 20-foot by 12-foot slab at 4 inches thick covers 240 square feet. Four inches equals approximately 0.333 foot.
The final ready-mix order may need to be rounded to the supplier's accepted increment.
Driveways and patios are often easy to estimate as rectangular sections. If a driveway widens, contains a parking pad or has changes in thickness, calculate each section separately so the total matches the actual concrete footprint.
| Project | Example Size | Thickness | Approx. Exact Volume |
|---|---|---|---|
| Small Patio | 10 × 12 ft | 4 in | 1.48 yd³ |
| Large Patio | 20 × 16 ft | 4 in | 3.95 yd³ |
| Driveway Section | 20 × 10 ft | 5 in | 3.09 yd³ |
| Garage Floor | 20 × 20 ft | 4 in | 4.94 yd³ |
Use the Concrete Slab Calculator for slab-specific estimating and the Rectangular Concrete Calculator for several straight-sided sections.
The Footing & Pad panel estimates square or rectangular footings under posts, columns and other supports. Enter the dimensions of one footing, then multiply by the number of identical footings.
Convert inch-based depth to feet before calculating cubic feet.
Use the Concrete Footing Calculator for dedicated footing geometry. Final footing dimensions and reinforcement should come from the project design.
Straight walls and curbs with constant cross-section can be estimated as rectangular prisms. Multiply total length by height and thickness. Where the dimensions change, calculate each portion separately.
Divide thickness in inches by 12 before multiplying.
Use the Concrete Wall Calculator for wall-specific volume planning.
Small repair areas and isolated pads may be manageable with bagged concrete. Multi-yard slabs can require many bags and mixer cycles, so ready-mix may be more practical for continuous placements.
| Bag Size | Approx. Yield Used | Bags per yd³ |
|---|---|---|
| 40 lb | 0.30 ft³ | About 90 |
| 60 lb | 0.45 ft³ | About 60 |
| 80 lb | 0.60 ft³ | About 45 |
Verify the actual bag yield on the selected product before purchasing.
Mixer-truck capacity varies by producer, vehicle and route. Enter the supplier's usable capacity rather than assuming every truck carries the same volume.
The last load may be partial and may have different pricing or minimum-load charges.
For short-load fees and truck spacing, use the Concrete Delivery Calculator.
Ready-mix concrete cost can change with mix, order size, delivery distance, fuel, minimum-load rules and supplier policies. The calculator therefore leaves the local price field editable rather than hard-coding a Austin price.
Add per-truck delivery fees when applicable. Pumping, labor, reinforcement, finishing and permits are separate.
Concrete work tied to a building, addition, foundation, structural wall or other regulated construction may require permits, plan review and inspections through Austin Development Services. The City provides an interactive permit guide to help determine whether a project needs a permit and which review path applies.
Austin's Building Technical Codes are in Chapter 25-12. The City states that the 2024 International Building Code, 2024 International Residential Code and other 2024 technical codes became effective July 10, 2025 for applicable applications. Building inspections are coordinated after permits are activated and can be scheduled online through the AB+C Portal or by phone.
Austin Development Services explains that inspections are part of the final permitting process and are used to verify that permitted work was built as approved and complies with applicable codes. Inspection timing depends on the scope of work, so contractors should coordinate required stages before work is covered or made inaccessible.
For new residential projects, Austin's Residential Plan Review division checks applicable work against the Land Development Code, the 2024 International Residential Code and local technical-code amendments. Use the Concrete Pouring Checklist for material and crew preparation, but use City permit documents to determine required inspections.
Austin projects can face intense summer heat, direct sun, warm subgrades and drying winds. These conditions can accelerate evaporation and change the pace of placement, finishing and curing. The volume calculation itself does not change, but the job plan may need to.
For temperature-related planning, use the Concrete Hot Weather Calculator where available, and prepare curing materials before the concrete arrives.
Foundation work may contain strip footings, isolated pads, foundation walls, piers and slabs. Estimate each geometry separately instead of applying one average thickness to the entire foundation.
Related tools include the Concrete Foundation Calculator, Concrete Pier Calculator, Concrete Rebar Weight Calculator and Concrete Control Joint Calculator.
Austin concrete quantity can be simple to calculate while delivery logistics are not. Urban lots, narrow driveways, active streets, hills, gated access and long pump reaches can all affect how concrete is placed. Before ordering, confirm where the mixer can safely stage, whether a pump is needed and how quickly the crew can discharge and finish each load.
For larger pours, split the project into realistic placement phases if the crew cannot place the full volume continuously. Use the Concrete Delivery Calculator for truck planning and the Concrete Mixer Capacity Calculator when working with site-mixed batches.
For concrete design, construction and ready-mix information, consult the American Concrete Institute (ACI) and National Ready Mixed Concrete Association (NRMCA). Final dimensions, thickness, concrete strength, reinforcement and structural details should follow approved project requirements.
Measure the project, calculate cubic yards, add a planning allowance and verify supplier and City requirements.
Answers about Austin slabs, patios, driveways, footings, delivery, bags, cost, permits and inspections.